- Exhaust System[3]
- Car Grills[2]
- Engine Assembly[3]
- Engine Mounts[2]
- Other Electronic Components[2]
- Auto Motor[5]
- Spray Booths[1]
- Car Cassette Player[5]
- Ratchet Buckle[1]
- Battery Packs[1]
- Other Car Care Equipment[2]
- Auto Sensors[2]
- Fuel Additives[3]
- Car Black Box[2]
- Auto Clutch[1]
- ATV Parts[1]
- Car Polishers[3]
- Car Fenders[1]
- Car Windows[1]
- Brake System[5]
- Power Accessories[1]
- Cables[1]
- Other Electronic Accessories[1]
- Emergency Tools[1]
- Car Fridges[1]
- Tire Covers[1]
- Coolant[1]
- Door Locks[1]
- Used Cars[1]
- Other Switches[1]
- Insulation Materials & Elements[1]
- Other Wires[1]
- Transformers[1]
- Gas Turbine Generators[1]
- Car Amplifiers[1]
- Car Wash Brushes[1]
- Air Conditioning System[1]
- New Cars[1]
- ATV[1]
- Contact Person : Ms. Xiao Grace
- Company Name : Tianjin Tianyuan Electronic Material Co., Ltd.
- Tel : 86-22-86995521
- Fax : 86-22-86996309
- Address : Tianjin,Tianjin,Science and Technology Area, Beichen District, Tianjin City. China (Yixingbu)
- Country/Region : China
- Zip : 300402
Polyimide Tape
Related Product Searches:Polyimide Tape,High Quality,Polyimide Tape, kapton tape,6051
Polyimide film (tape) 6051
Polyimide Tape
Standard No.: JB/T 2726-1996
Applicable Range: The polyimide film is manufactured with the raw materials of pyromellitic dianhydride and 4,4---diaminodiphenyl ether synthetic resin, and adopted with “doctor-blading process”. It can resist high temperature and radiation as well as possess excellent dielectric performance and physical performance. It is applicable to motor Grade H, electric appliance insulation, and the electric insulating materials for other purposes.
I. Technological requirement:
1. Appearance: Film surface is smooth, bright and clean. It shall have no defects, such as folding, tearing, particulate, air bubble, pinhole and any external impurity. Its edges shall be orderly and have no breakage. And the film is provided in rolls.
2. Dimension1) Thickness and allowable deviation: see the recommended thickness in Table One. The products with other thickness can be supplied according to the requirements of customer.
Table One
Unit: μm
Standard Thickness | 25μm | 40μm | 50μm | 75μm | 100μm | 125μm | 175μm | 200μm |
Allowable Deviation | +2.5 | +4 | +5 | +7.5 | +8 | +8 | +8 | +8 |
-2.5
| -4 | -5 | -7.5 | -7 | -8 | -8 | -8 |
2) Width and length: supplied according to requirements of customer
3) Performances shall conform to the stipulations in Table Two
Table Two
II. Packing, mark, storage and transportation1. The film shall be provided in rolls and wound around pipe core, each roll is well packed and sealed with plastic bag to be placed into dry and clean box.
Polyimide Tape
